Oil burners IL-S-T

Automatic blast block oil burner IL-S-T SibStrong ® is designed to work in hot water and steam boilers of various designs, process plants, including grain dryers, oil refineries, heating furnaces, etc.

Burner type provides stable operation on petroleum fuels with a viscosity index of up to 20 cSt at 50 ° C, switching to light oil fuel is provided.

The standard equipment of the IL-ST type burner includes, among other things, a Fuel pumping station (SPT) that provides fuel preheating and filtration, and an NSh type fuel pump (Russia). Upon additional request, a Suntec brand fuel pump (France) is installed.

The capabilities of Service Center allow periodic and seasonal maintenance of burners at a high level and in a short time.

Certificate of conformity

Booklet

Equipment

TECHNICAL AND FUNCTIONAL CHARACTERISTICS

• Operate in one-, two-, three-stage and modulation mode.
• The main type of fuel is oil, light heavy oil, it is possible to work on heating oil, gas condensate, light oil fuel.
• Used to work with all types of combustion chambers.
• Mechanical atomization of fuel at high pressure using a nozzle.
• Complete combustion of fuel by controlling the ratio of air and fuel.
• The fuel assembly is specifically designed for high viscosity fuels and circulates fuel during burner purge.
• The regulation of the air flow at the minimum and maximum operating conditions is provided by an electric servomotor. Automatic blocking of air access to the furnace when the burner stops.
• The burner is equipped with a mounting flange and gasket, as well as two flexible fuel hoses, and nozzles.

IL-S-T - single stage, IL-S2-T - two stage, IL-S3-T - three stage, IL-SM-T - modulating

Dimensions (mm)

Power diagrams

COMPLETE BURNERS STANDARD

Burner housing, housing cover, burner mating flange, flange seal, burner motor, fan wheel, solenoid valve system, heavy oil burner fuel assembly, nozzles, control panel with burner control, burner tube with turbulator, air damper with servomotor ( for single-stage burners without a servo drive), ignition transformer, ignition cables, ignition electrodes, flame sensor, external pumping station with an NSh fuel pump, fuel hoses, pressure reducing valve, pressure gauge, Fuel pumping station (SPT).

ADDITIONAL PACKAGE IS POSSIBLE

• single adapter flange
• double reducer flange
• mechanical movable support with adapter flange
• boiler control panel with thermal resistance sensors
• burner control panel with thermal resistance sensors
• non-standard burner tube length
• distance of the burner panel from the housing up to 3 m.
• non-standard position of the burner on the process unit (vertical)
• injector set
• fuel pump

PERFORMANCE REQUIREMENTS

• Fuel used for combustion in burners: “Petroleum fuel. heavy oil” GOST 10585-2013, “Diesel fuel. Specifications” GOST 305-2013
• Fuel viscosity index up to 20 cSt at 50°C
• Power supply voltage, nominal: 220-380V, 50Hz

CONSTRUCTION CHARACTERISTICS

• Aluminum alloy burner body
• A highly efficient fan that ensures reliable operation of the burner, also on boilers with increased back pressure in the furnace.
• One three-phase electric motor drives the fan, the other drives the oil pump.
• One electric servomotor with mechanical cam for air/fuel ratio control on two-, three-stage burners and two electronically controlled servomotors on modulating burners.
• High pressure gear pump NSh10 (Russia).
• Injector unit with a mechanical valve that closes the fuel supply to the injector during purge.
• Fuel pumping station including removable strainer, heating elements, electronic temperature controller and safety thermostat.
• Automatic control and burner control unit.
• Control of the presence of a flame with a photo sensor.
• The control panel includes: switches for the burner operation modes (heavy oil, light oil, heating) indicators for operation, blocking and burner preheater.
• Terminal block for power supply and connection of thermostats for 1st, 2nd stage burner control or power controller connection.
• The degree of dust and moisture protection of the burner is IP40.

SibStrong type IL-ST liquid fuel automatic block burners are designed specifically to operate on oil with a fuel viscosity index of up to 20 cSt at 50°C. The body of the burners is cast, made of aluminum alloy. The burners are equipped with a high-performance radial low-pressure fan wheel, an air-fuel mixture control system, a fuel supply system that includes a universal fuel unit and a gear fuel pump of the NSh10 type (Russia), as well as a control system that ensures automatic operation of the burner.

Control type options: one-, two-, three-stage and modulating.
Control type options: automatic and mechanical.

The range of burner types provides power from 50 kW to 6000 kW, with different lengths of burner pipes, which depend on the parameters of boilers and process plants. Easy to set up and maintain, as well as cost-effective operation - the main advantages of SibStrong burners.

Thanks to a mechanical movable support with a mating flange, regardless of the weight and dimensions of the burner, it is possible to carry out maintenance operations by one operator. These models are suitable for installation on fire-tube, water-tube boilers and steam generators of Russian, European and Korean production, for example: ), Biysk Plant of Boilers and Auxiliary Equipment (OOO PO BZKiVO), LLC Boiler Plant BAMZ, LLC DENKAR, LLC PK Kotlomash, LLC Zavod Garant, LLC KZ NPO Arsenal, LLC ZEO EnergoStal, Uran (LLC Samara Lei ;), ECO-PAR (KZKEO Cogeneration LLC), TEPLO (ZZBO LLC), Industrial hot water and steam boilers (Elevatormelmash), KV-G, kgM (DKM), RS-D (Plant Boiler Equipment Tuymazy), FR and ZIOSAB (ZIOSAB), Arcus Ignis (Izhevsk Boiler Plant LLC), Logano, Buran Boiler, TITAN (Trading House TITAN LLC), Lavart (Omzit ) etc.

In a special version, the burners can be installed on steam boilers of the E-1.0-0.9 type from manufacturers such as the Energetik Industrial Boiler Plant.

It is possible to manufacture burners of a special design, which allows them to be used on various heating furnaces, furnace blocks, air heaters, grain dryers, drying drums, process heaters, etc.

These models of burners are suitable for operation as part of grain drying plants of foreign and Russian production, for example: ASTRA, Vesta ("Melinvest", C-Zlata Master, C-Zlata, S-Standard ("Agropromtekhnika") , Voronezhselmash, ROMAX, AgroTechHolding Group of Companies, AGROSTROY grain dryer (Voronezh Agromash Plant LLC), ASM-AGRO (Conveyor grain dryer plant), MSK-Prodmash, Alfatrade, etc.
And also for grain drying complexes such as DSP 24, DSP 32, DSP 50, Tselinnaya 50, M 819, M 618, SZSh 16, KZS 10Sh, KZS 20Sh, KZS 25 and heat generators (furnace blocks) type TAU 0, 75, TAU 1.5, TAU 2.5, RIR TB 0.1TO-3.2TO(PN).

At your request, the specialists of our company will select the burner in the required configuration for the boiler, heat generator and any other process unit you have chosen, if necessary, make additional calculations and agree on the connecting dimensions.

You can send an application by e-mail info@sibstrong.com or contact us by phone +73833049334.

The company provides a full range of services related to the selection and supply of equipment, including technical and technological advice to the Customer, commissioning, training of the Customer's personnel, maintenance and repair, supply of spare parts and consumables.