heavy oil burners IL-S
The SibStrong ® automatic blast block burner is designed to operate in hot water and steam boilers of various designs, process plants, including grain dryers, oil refineries, heating furnaces, etc.
The type of burner ensures stable operation on heavy oil grades M40, M100, it is possible to switch to the operating mode - light oil fuel.
As part of the burner, a fuel pump of the NSh type (Russia) is installed as standard; on additional request, a fuel pump of the Suntec brand (France) is installed.
The capabilities of the Service Center allow for periodic and seasonal maintenance of burners at a high level and in a short time.
TECHNICAL AND FUNCTIONAL CHARACTERISTICS
- Operate in one-, two-, three-stage and modulation mode.
- The main type of fuel is heavy oil, light oil fuel is also possible.
- Used to work with all types of combustion chambers.
- Mechanical atomization of the fuel, using a nozzle, with high pressure.
- Complete combustion of fuel is ensured by controlling the ratio of air and fuel.
- The fuel assembly is specifically designed for high viscosity fuels and circulates fuel during burner purge.
- The regulation of the air flow at the minimum and maximum operating conditions is provided by an electric servomotor. Automatic blocking of air access to the furnace when the burner stops.
- The burner is equipped with a mounting flange and sealing gasket, as well as flexible fuel hoses and nozzles.
IL-S - single stage, IL-S2 - two stage, IL-S3 - three stage, IL-SM - modulating
| IL-S | Capacity | Oil consumption | Power consumption | Motor power | Oill heater | Fuel line diameter in-out | Weight, no more |
|---|---|---|---|---|---|---|---|
| IL-2SA | 90-230 kW/h | 8-21 kg/hour | 3 kW | 0,37 kW | 1,6 kW | 1/2-3/8 inch | 42 kg |
| IL-3SA | 200-500 kW/h | 18-45 kg/hour | 5,3 kW | 0,75 kW | 3,9 kW | 1/2-3/8 inch | 60 kg |
| IL-5S | 465-850 kW/h | 42-76 kg/hour | 8,7 kW | 1,5 kW | 6 kW | 1/2-3/8 inch | 72 kg |
| IL-S2 | Capacity | Oil consumption | Power consumption | Motor power | Oill heater | Fuel line diameter in-out | Weight, no more |
|---|---|---|---|---|---|---|---|
| IL-3S2A | 200-700 kW/h | 18-63 kg/hour | 5,3 kW | 0,75 kW | 3,9 kW | 1/2-3/8 inch | 60 kg |
| IL-5S2 | 465-1200 kW/h | 42-107 kg/hour | 8,7 kW | 1,5 kW | 6 kW | 1/2-3/8 inch | 72 kg |
| IL-7S2 | 600-1800 kW/h | 54-161 kg/hour | 14,4 kW | 3 kW | 10,2 kW | 1/2-3/8 inch | 120 kg |
| IL-8S2 | 700-2900 kW/h | 63-260 kg/hour | 20,2 kW | 4 kW | 15 kW | 1/2-3/8 inch | 125 kg |
| IL-8S2A | 700-3200 kW/h | 63-287 kg/hour | 20,2 kW | 4 kW | 15 kW | 1/2-3/8 inch | 125 kg |
| IL-9S2 | 1000-4000 kW/h | 90-359 kg/hour | 29,6 kW | 5,5 kW | 22,5 kW | 3/4-1/2 inch | 223 kg |
| IL-S3 IL-SM | Capacity | Oil consumption | Power consumption | Motor power | Oill heater | Fuel line diameter in-out | Weight, no more |
|---|---|---|---|---|---|---|---|
| IL-7S3 | 600-1800 kW/h | 54-161 kg/hour | 14,4 kW | 3 kW | 10,2 kW | 1/2-3/8 inch | 120 kg |
| IL-8S3 | 700-2900 kW/h | 63-260 kg/hour | 20,2 kW | 4 kW | 15 kW | 1/2-3/8 inch | 125 kg |
| IL-8S3A | 700-3200 kW/h | 63-287 kg/hour | 20,2 kW | 4 kW | 15 kW | 1/2-3/8 inch | 125 kg |
| IL-9S3 | 1000-4000 kW/h | 90-359 kg/hour | 29,6 kW | 5,5 kW | 22,5 kW | 3/4-1/2 inch | 223 kg |
| IL-1OS3 | 1200-6000 kW/h | 107-538 kg/hour | 43,4 kW | 11 kW | 30 kW | 3/4-1/2 inch | 250 kg |
| IL-5SM | 465-1200 kW/h | 42-107 kg/hour | 8,7 kW | 1.5 kW | 6 kW | 1/2-3/8 inch | 72 kg |
| IL-7SM | 600-1800 kW/h | 54-161 kg/hour | 14,4 kW | 3 kW | 10,2 kW | 1/2-3/8 inch | 120 kg |
| IL-8SM | 700-2900 kW/h | 63-260 kg/hour | 20,2 kW | 4 kW | 15 kW | 1/2-3/8 inch | 125 kg |
| IL-8SMA | 700-3200 kW/h | 63-287 kg/hour | 20,2 kW | 4 kW | 15 kW | 1/2-3/8 inch | 125 kg |
| IL-9SM | 1000-4000 kW/h | 90-359 kg/hour | 29,6 kW | 5,5 kW | 22,5 kW | 3/4-1/2 inch | 223 kg |
| IL-10SM | 1200-6000 kW/h | 107-538 kg/hour | 43,4 kW | 11 kW | 30 kW | 3/4-1/2 inch | 250 kg |
Dimensions (mm)
| Burner type | А | В | С | d | К | D | Dmax | F | G | Н | L | М |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IL-2S | 450 | 475 | 250 | 130 | 120 | 205 | 300 | 395 | 118 | 147 | 104 | М8 |
| IL-3S | 650 | 605 | 307 | 160 | 130 | 255 | 350 | 470 | 136 | 212 | 150 | М10 |
| IL-5S | 745 | 690 | 370 | 180 | 175 | 305 | 450 | 550 | 150 | 220 | 156 | М12 |
| IL-7S | 870 | 810 | 400 | 200 | 220 | 310 | 500 | 630 | 196 | 260 | 184 | М12 |
| IL-8S | 870 | 810 | 400 | 240 | 220 | 305 | 500 | 630 | 196 | 260 | 184 | М12 |
| IL-9S | 1050 | 1000 | 495 | 240 | 235 | 355 | 500 | 750 | 256 | 330 | 233 | М16 |
| IL-10S | 975 | 1040 | 490 | 300 | 340 | 455 | 500 | 750 | 284 | 355 | 251 | М16 |
Power diagrams
COMPLETE BURNERS STANDARD
Burner housing, housing cover, burner mating flange, flange seal, burner motor, fan wheel, solenoid valve system, heavy oil burner fuel assembly, nozzles, fuel heater, electric control panel with burner control, burner tube with turbulator, air damper with servo drive (for single-stage burners without servo drive), ignition transformer, ignition cables, ignition electrodes, flame detector, external pumping station with fuel pump NSh, fuel hoses, pressure reducing valve, pressure gauge.
ADDITIONAL PACKAGE IS POSSIBLE
- single adapter flange
- double reducer flange
- mechanical movable support with adapter flange
- Fuel pumping station (SPT), with preheating and fuel filtration
- boiler control panel with thermal resistance sensors
- burner control panel with thermal resistance sensors
- non-standard burner tube length
- distance of the burner panel from the housing up to 3 m
- non-standard position of the burner on the process unit (vertical)
- injector set
- fuel pump
PERFORMANCE REQUIREMENTS
- Fuel used for combustion in burners: “Petroleum fuel. heavy oil” GOST 10585-2013, “Diesel fuel. Specifications” GOST 305-2013
- Fuel viscosity rating up to 100 cSt at 80°C
- Power supply voltage, nominal 220-380V, 50Hz
CONSTRUCTION CHARACTERISTICS
- Aluminum alloy burner body
- High-efficiency fan ensures reliable operation of the burner, also on boilers with increased back pressure in the furnace.
- One three-phase electric motor drives the fan, the other drives the oil pump.
- One electric servomotor with mechanical cam for air/fuel ratio control on two-, three-stage burners and two electronically controlled servomotors on modulating burners.
- High pressure gear pump NSh10 (Russia).
- Injector assembly with mechanical valve closes the fuel supply to the injector during purge.
- The fuel heater is controlled by an electronic thermostat and an additional safety thermostat.
- Automatic control and burner control unit.
- Control of the presence of a flame with a photo sensor.
- The control panel includes: burner operation mode switches (heavy oil, light oil, heating); indicators for operation, blocking and burner preheater.
- Terminal block for power supply and connection of thermostats for 1st, 2nd stage burner control or power controller connection.
- The degree of dust and moisture protection of the burner is IP40.
Buy oil burners
Sale of oil burners for the boiler at affordable prices from the manufacturer of burners in the Russian Federation. We offer a wide range of reliable heavy oil burners. Our experts will offer a heavy oil burner suitable for the power and viscosity of the fuel and answer all your questions. Own service center will promptly help to solve technical problems. The optimal combination of price and quality. Delivery of goods throughout Russia.